Copyright 2011 Anita M. Wheeless
SIZE
One size fits all, allowing for the addition of more or less elastic for a perfect fit.
FINISHED MEASUREMENTS
A little over 7 inches from side of eyeglass to the other side of the eyeglass
MATERIALS
For glasses, ear pieces and mustache: Patons Classic Merino; 100% pure wool; 223 yards per 100 gram skein; color: 226 black; 1 skein
For fluffy mustache: Sirdar Foxy Fur; 100% polyester; 44 yards per 50 gram ball; color: Mink; oddment (just enough for the mustache)
For Darker Nose: Ella Rae Classic Merino; 100 % pure wool; 219 yards per 100 gram skein; color: 33; 1 skein
For Lighter nose: Galway; 100% pure wool; 210 yards per 100-gram skein; color: 138; 1 skein
1 set of 5 size US 8/5.0 mm double-point needles
Notions required: Strong black thread; black three-quarter-inch elastic; locking-ring stitch markers
GAUGE
Because item is felted, gauge is not important
PATTERN NOTES
Knitting in the round on both three double-pointed needles and four double-pointed needles. I-cord is used.
PATTERN
Nose: Use 4 double-pointed needles
Knitting back and forth with the double-pointed needles and your choice of nose- colored, wool yarn, cast on 24 stitches onto one needle.
Row 1: Divide by knitting 8 stitches onto each of the three double-pointed needles. Place a stitch marker before the first stitch on the first needle and prepare to join.
Rounds 2-8: Knit these 7 rounds.
Round 9: Needle 1: ssk, k6 (7)
Needle 2: k2tog, k6 (7)
Needle 3: k6, k2tog (7)
Round 10: Knit
Round 11: Needle 1: ssk, k5 (6)
Needle 2: K5, k2tog (6)
Needle 3: k5, k2tog (6)
Round 12: Knit
Round 13: Needle 1: ssk, k4 (5)
Needle 2: k2tog, k4 (5)
Needle 3: k4, k2tog (5)
Round 14: Knit
Round 15: Needle 1: ssk, k3 (4)
Needle 2: k3, k2tog (4)
Needle 3: k3, k2tog (4)
Round 16: Needle 1: ssk, k2 (3)
Needle 2: k2tog, k2 (3)
Needle 3: K2, k2tog (3)
Cut yarn, leaving a long tail. Thread tail through a yarn needle and gather the remaining stitches onto it. Pull tightly to close. Knot off and weave in loose end.
Glasses (make 2) Use 4 double-pointed needles
Knitting back and forth with black wool yarn and the double-pointed needles, cast on 30 stitches.
Row 1: Divide by knitting 10 stitches onto each of three double-pointed needles. Place your stitch marker before the first stitch on the first needle. Prepare to join.
Rounds 2-3: Knit these 2 rounds.
Bind off.
Bridge of the nose: Taking one of the eyeglass rings, pick up 3 stitches simply by inserting one of your needles into three stitches on the outside center of the ring. Knitting back and forth in stockinette stitch,
Row 1: knit
Row 2: Purl
Row 3: Knit
Row 4: Purl bind off
Cut yarn. Using matching black thread, stitch this piece securely to the corresponding place on the other eyeglass ring.
Ear Pieces (make 2) Use 2 double-pointed needles
Take your double-pointed needles and cast on 6 stitches. Make a 40-row I-cord.
Regular Mustache (use 5 double-pointed needles)
Knitting back and forth with black wool yarn and the double-pointed needles, cast on 16.
Row 1: Divide by knitting 4 stitches onto each of 4 double-pointed needles. Place a stitch marker before the first stitch on the first needle and prepare to join.
Round 2: Knit (4 on each needle)
Round 3: Increase in each stitch on each needle. (8 on each)
From now on, you will knit back and forth on each individual needle (separately), finishing one and then starting on the next. Starting with the needle you're on:
Row 4: Purl
Row 5: Knit
Row 6: Purl
Row 7: k2tog, k4, ssk (6)
Row 8: Purl
Row 9: k2tog, k2, ssk (4)
Row 10: Purl
Row 11: k2tog, ssk (2)
Cut yarn, leaving a long tail. Thread tail through a yarn needle and gather remaining stitches on it. Pull tightly to close. Knot off and weave in the loose end.
Repeat the above directions from rows 4-11 with the stitches on each, individual needle.
After all four pieces segments have been knitted, fold them over, so that you have a front and a back, as well as a left and a right side to the mustache. Stitch the sides together using black yarn and a mattress or ladder stitch.
Fluffy Mustache
Wait until after felting. Cut strands of Foxy Fur two times the desired length of the mustache. Fold each strand over and stitch securely under the felted nose.
FELTING
Put the eyeglasses, the ear pieces, the nose and the regular mustache into a zippered lingerie bag. Throw the bag into your washing machine. Sprinkle in a little bit of laundry detergent. Set your washer to the hottest, longest wash with the least amount of water. Set a timer and check your pieces about every five minutes until most, if not all, of the stitch marks have disappeared and each piece is firm and fully felted. The felted ear pieces will each measure somewhere between 6.5 and 7 inches long.
Stretch each ring of the eyeglass over a 2.5 inch round form, such as a glass candle holder, a jelly jar, etc.
Pinch under the nose to form nostrils.
Set the pieces aside to dry, which could take up to several days.
FINISHING
When dry, center the nose under the eyeglasses and stitch securely to both rings and also the little bridge-of-the-nose piece. Center the regular mustache under the nose and stitch securely in place. If you want the fluffy mustache, stitch the strands in place under the nose. Trim, if necessary. Stitch the ear pieces securely to each side. Measure the person's head (or the item, if a fruit or vegetable, for instance) from the end of one ear piece to the other. Cut a piece of black elastic stretched to this measurement. Stitch the elastic securely in place on ear piece, then to the other, joining the ear pieces with it.
I hope you enjoy it! As with all my patterns, if you run into any bumps or trouble spots along the way, please email me and I'll help!
SIZE
One size fits all, allowing for the addition of more or less elastic for a perfect fit.
FINISHED MEASUREMENTS
A little over 7 inches from side of eyeglass to the other side of the eyeglass
MATERIALS
For glasses, ear pieces and mustache: Patons Classic Merino; 100% pure wool; 223 yards per 100 gram skein; color: 226 black; 1 skein
For fluffy mustache: Sirdar Foxy Fur; 100% polyester; 44 yards per 50 gram ball; color: Mink; oddment (just enough for the mustache)
For Darker Nose: Ella Rae Classic Merino; 100 % pure wool; 219 yards per 100 gram skein; color: 33; 1 skein
For Lighter nose: Galway; 100% pure wool; 210 yards per 100-gram skein; color: 138; 1 skein
1 set of 5 size US 8/5.0 mm double-point needles
Notions required: Strong black thread; black three-quarter-inch elastic; locking-ring stitch markers
GAUGE
Because item is felted, gauge is not important
PATTERN NOTES
Knitting in the round on both three double-pointed needles and four double-pointed needles. I-cord is used.
PATTERN
Nose: Use 4 double-pointed needles
Knitting back and forth with the double-pointed needles and your choice of nose- colored, wool yarn, cast on 24 stitches onto one needle.
Row 1: Divide by knitting 8 stitches onto each of the three double-pointed needles. Place a stitch marker before the first stitch on the first needle and prepare to join.
Rounds 2-8: Knit these 7 rounds.
Round 9: Needle 1: ssk, k6 (7)
Needle 2: k2tog, k6 (7)
Needle 3: k6, k2tog (7)
Round 10: Knit
Round 11: Needle 1: ssk, k5 (6)
Needle 2: K5, k2tog (6)
Needle 3: k5, k2tog (6)
Round 12: Knit
Round 13: Needle 1: ssk, k4 (5)
Needle 2: k2tog, k4 (5)
Needle 3: k4, k2tog (5)
Round 14: Knit
Round 15: Needle 1: ssk, k3 (4)
Needle 2: k3, k2tog (4)
Needle 3: k3, k2tog (4)
Round 16: Needle 1: ssk, k2 (3)
Needle 2: k2tog, k2 (3)
Needle 3: K2, k2tog (3)
Cut yarn, leaving a long tail. Thread tail through a yarn needle and gather the remaining stitches onto it. Pull tightly to close. Knot off and weave in loose end.
Glasses (make 2) Use 4 double-pointed needles
Knitting back and forth with black wool yarn and the double-pointed needles, cast on 30 stitches.
Row 1: Divide by knitting 10 stitches onto each of three double-pointed needles. Place your stitch marker before the first stitch on the first needle. Prepare to join.
Rounds 2-3: Knit these 2 rounds.
Bind off.
Bridge of the nose: Taking one of the eyeglass rings, pick up 3 stitches simply by inserting one of your needles into three stitches on the outside center of the ring. Knitting back and forth in stockinette stitch,
Row 1: knit
Row 2: Purl
Row 3: Knit
Row 4: Purl bind off
Cut yarn. Using matching black thread, stitch this piece securely to the corresponding place on the other eyeglass ring.
Ear Pieces (make 2) Use 2 double-pointed needles
Take your double-pointed needles and cast on 6 stitches. Make a 40-row I-cord.
Regular Mustache (use 5 double-pointed needles)
Knitting back and forth with black wool yarn and the double-pointed needles, cast on 16.
Row 1: Divide by knitting 4 stitches onto each of 4 double-pointed needles. Place a stitch marker before the first stitch on the first needle and prepare to join.
Round 2: Knit (4 on each needle)
Round 3: Increase in each stitch on each needle. (8 on each)
From now on, you will knit back and forth on each individual needle (separately), finishing one and then starting on the next. Starting with the needle you're on:
Row 4: Purl
Row 5: Knit
Row 6: Purl
Row 7: k2tog, k4, ssk (6)
Row 8: Purl
Row 9: k2tog, k2, ssk (4)
Row 10: Purl
Row 11: k2tog, ssk (2)
Cut yarn, leaving a long tail. Thread tail through a yarn needle and gather remaining stitches on it. Pull tightly to close. Knot off and weave in the loose end.
Repeat the above directions from rows 4-11 with the stitches on each, individual needle.
After all four pieces segments have been knitted, fold them over, so that you have a front and a back, as well as a left and a right side to the mustache. Stitch the sides together using black yarn and a mattress or ladder stitch.
Fluffy Mustache
Wait until after felting. Cut strands of Foxy Fur two times the desired length of the mustache. Fold each strand over and stitch securely under the felted nose.
FELTING
Put the eyeglasses, the ear pieces, the nose and the regular mustache into a zippered lingerie bag. Throw the bag into your washing machine. Sprinkle in a little bit of laundry detergent. Set your washer to the hottest, longest wash with the least amount of water. Set a timer and check your pieces about every five minutes until most, if not all, of the stitch marks have disappeared and each piece is firm and fully felted. The felted ear pieces will each measure somewhere between 6.5 and 7 inches long.
Stretch each ring of the eyeglass over a 2.5 inch round form, such as a glass candle holder, a jelly jar, etc.
Pinch under the nose to form nostrils.
Set the pieces aside to dry, which could take up to several days.
FINISHING
When dry, center the nose under the eyeglasses and stitch securely to both rings and also the little bridge-of-the-nose piece. Center the regular mustache under the nose and stitch securely in place. If you want the fluffy mustache, stitch the strands in place under the nose. Trim, if necessary. Stitch the ear pieces securely to each side. Measure the person's head (or the item, if a fruit or vegetable, for instance) from the end of one ear piece to the other. Cut a piece of black elastic stretched to this measurement. Stitch the elastic securely in place on ear piece, then to the other, joining the ear pieces with it.
I hope you enjoy it! As with all my patterns, if you run into any bumps or trouble spots along the way, please email me and I'll help!
1 comment:
I saw these all over my friends' stuff in Rav today. They are so great! Will be on the to-do list come Halloween time for sure.
Post a Comment